STEP 1. STEP 2. Here's everything you need. Note the washers, they are important too. Remove this bolt from the fender. Once it's out make sure to put a washer over the hole before putting in the smaller screw. STEP 3. STEP 4. Lower knob installed, your half way there... This is the upper location install point, where the bigger bolt goes. STEP 5. STEP 6. Upper knob installed, now for the lift! Snap the lifter into each knob. Here's the lift installed! Repeat steps 1 to 5 for the other side and voila, you're done!

This site is not affiliated with Volkswagen of America, Audi of America
or its parent company VW AG or Audi AG.
For more info or questions email: info@pocketrocket.ca