Discussion area for the second generation VW Golf and Jetta produced from 1985 to 1992.
 by Kritter » December 14th, 2009, 3:26 pm
Pre-Christmas update... Well it's getting friggen cold in the barn now, so most of the work will be shut down until warmer weather... but the plus side is I reg'd for my Autobody course today :P so once the sun comes back and my nuts don't freeze working in the barn, I can break out the welder and get to work... My adapters are on there way to me (4x100 to 5x130 in 25mm and 35mm) and the block is almost done being dis-assembled, so there's small things in the works... other than that, it's back to dreaming and Forza 3 for me!!  Now Rocking a TTC Buspass.... all the cool kids are doing it!
MKII Golf: The Project - Eight Valves of Fury
Honorary Member: Wolfsburg Tuning
-
Kritter
- TPR REGULAR
-
- Posts: 768
- Joined: May 2nd, 2002, 4:01 am
- Location: T.Dot
-
by Kritter » December 31st, 2009, 12:30 am
Goodies... Courtesy of goteurowagen...  Now Rocking a TTC Buspass.... all the cool kids are doing it!
MKII Golf: The Project - Eight Valves of Fury
Honorary Member: Wolfsburg Tuning
-
Kritter
- TPR REGULAR
-
- Posts: 768
- Joined: May 2nd, 2002, 4:01 am
- Location: T.Dot
-
by Kritter » January 1st, 2010, 12:10 pm
[KRAFTIG] wrote:Sure are pretty 
Only question is whether or not to powdercoat them like the rest of the wheels or not... :P Now Rocking a TTC Buspass.... all the cool kids are doing it!
MKII Golf: The Project - Eight Valves of Fury
Honorary Member: Wolfsburg Tuning
-
Kritter
- TPR REGULAR
-
- Posts: 768
- Joined: May 2nd, 2002, 4:01 am
- Location: T.Dot
-
by Kritter » February 17th, 2010, 12:35 am
just ordered... on the way to me :P  Now Rocking a TTC Buspass.... all the cool kids are doing it!
MKII Golf: The Project - Eight Valves of Fury
Honorary Member: Wolfsburg Tuning
-
Kritter
- TPR REGULAR
-
- Posts: 768
- Joined: May 2nd, 2002, 4:01 am
- Location: T.Dot
-
by Kritter » March 28th, 2010, 8:14 pm
Picked up another piece to the puzzle this weekend. Johnny (VaughanRapidTransit) and I made a run to St. Catherines to pick up a 16V that will give up it's head and various other part to feed my turbo project car.
That being said, it's time to look into machine shops, hardware and internals... since this is taking on more of a 'long term' build than I'd hoped for, I might as well go whole=hog on the thing ad do it right the first time...
Oh... And my adapters still haven't shown up... kinda pissed. We'll see what happens this week.
.: topher :.
Now Rocking a TTC Buspass.... all the cool kids are doing it!
MKII Golf: The Project - Eight Valves of Fury
Honorary Member: Wolfsburg Tuning
-
Kritter
- TPR REGULAR
-
- Posts: 768
- Joined: May 2nd, 2002, 4:01 am
- Location: T.Dot
-
by Kritter » April 2nd, 2010, 1:07 pm
So My Porsche Adapters have finally showed up... 25mm and 35mm with hardware from 1552v2 / Adaptec Speedware. Going to fit them this weekend (sans rubber) and figure out how much I need to adjust the fender flares to make the hella-flush  Aside from that I'm prob. gonna end up tear apart the rest of the ABA, and then start on the 16V I've got too... yea fun! Stay tuned... pics to come. Now Rocking a TTC Buspass.... all the cool kids are doing it!
MKII Golf: The Project - Eight Valves of Fury
Honorary Member: Wolfsburg Tuning
-
Kritter
- TPR REGULAR
-
- Posts: 768
- Joined: May 2nd, 2002, 4:01 am
- Location: T.Dot
-
by Kritter » April 4th, 2010, 8:27 pm
[KRAFTIG] wrote:Can I borrow your adaptors? 
Sure... do you have anything that'll run 4x100? Now Rocking a TTC Buspass.... all the cool kids are doing it!
MKII Golf: The Project - Eight Valves of Fury
Honorary Member: Wolfsburg Tuning
-
Kritter
- TPR REGULAR
-
- Posts: 768
- Joined: May 2nd, 2002, 4:01 am
- Location: T.Dot
-
by [KRAFTIG] » April 4th, 2010, 9:25 pm
Kritter wrote:[KRAFTIG] wrote:Can I borrow your adaptors?
Sure... do you have anything that'll run 4x100?
No. Can we drill another hole in those chucks of aluminum?   MKI Audi TT Coupe 19" BBS CH | Koni Coilovers | Forge Rear Control Arms | Blue Flame Exhaust | Unitronic Chipped | 3M Clear Bra | OSIR O-Caps
Neuspeed 19mm Rear Sway Bar | Brembo GT BBK | A.W.E. Boost Gauge | Mantis Gauge Pod | Stewart Warner GaugesMKV Volkswagen Rabbit18" Rota Formula Wheels | Eibach Sportline Springs | BFI 3" Antenna | OEM Monster Mats | OEM Six Disc Changer | OEM Golf Ball Shift Knob | OEM Cargo Net | VentureShield Clear Bra
-
[KRAFTIG]
- .
-
- Posts: 17193
- Joined: March 21st, 2002, 5:01 am
- Location: Woodbridge, Ontario
-
Return to MKII Golf/Jetta
Who is online
Users browsing this forum: No registered users and 1 guest
|
