VW TECH BY: ünpimptheauto

Move seat completely forward to access the triple square drive bolts.

Move seat completely backwards to access the triple square drive bolts.

1. Remove drawer from frame.

2. Remove clips. See red arrow.

3.. Lift large tab to unlock drawer (use screwdriver).  Blue arrow.

Drawer clips removed.

Secure the five torx screw to the seat drawer frame.  See yellow arrows above.

Attach bracket, then frame.

Install the bracket included with the kit using the two pop rivets.  Yellow arrows above.

The screw holes on the bottom of the seat become more obvious, once the frame is put in place. Don't worry about the many, many other holes.

TIP! Using a cordless screwdriver (with torx bit attachment) to secure the frame is MUCH easier as you can apply pressure AND screw it in at the same time. Otherwise, trying to thread the holes with the screws is much more difficult.

Attach frame to seat.  Use a torx screw to attach frame to bracket installed in step 5.  See yellow arrow above.

Install the drawer.  Ignore the 4 year old observer.

Drawer closed.

Drawer open.  Enjoy!