|
THE TOOLS. |
STEP 1. |
Tools needed:
1. Scissors or a nice exacto-knife.
2. Coarse to fine sandpaper.
3. Paper towels, for the mess.
4. Some patience.
VW TECH BY: Jean
Malicar
|
First off, all you'll need is one of these or
you can't do much. Go and get yourself a nice
Mach3 Turbo razor (or as I call it, my one point
eight turbo). Just look at the fine
craftsmanship. |
|
STEP 2. |
STEP 3. |
Stop staring at it!!! You'll need one of
these also. I got mine from a quilt and
fabric shop (works wonders). |
Gently take off this plastic piece.
|
|
STEP 4. |
STEP 5. |
Nice. |
Start cutting until you
get to something that looks like this. |
|
STEP 6. |
STEP 7. |
Get your sandpaper and
start grinding down the little guy. |
Keep sanding until it
looks like this (don't go to thin now or you'll
need another Mach3 turbo razor). |
|
STEP 8. |
STEP 9. |
Now you've got something... no your not finished
yet but, your damn close. |
Your going to need some powerful adhesive.
I used the following (photo above). Just
follow the directions on how to use the glue and
centre the turbo logo onto your VW key. |
|
STEP 10. |
Let the glue dry for 30
minutes and BAMMMMM... |
